home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Overload Trio 2
/
Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO
/
dir30
/
mcadam1.zip
/
MCD.ZIP
/
MCADAM
/
README.DOC
< prev
next >
Wrap
Text File
|
1994-04-09
|
3KB
|
59 lines
README.DOC
Update Information for
MICRO CADAM FREE DEMONSTRATION SOFTWARE
User Guide and Installation Guide
ALTIUM
an IBM Company
1001 W.T. Harris Blvd. West
Building 202
Charlotte, North Carolina 28257
(704) 595-6900
This is a free demonstration version of MICRO CADAM CORNERSTONE software.
ALTIUM Inc. retains ownership of this software. There are no restrictions
on use. You are encouraged to copy and freely distribute this software.
ALL RIGHTS RESERVED.
Please read Chapter 32 in the USING MICRO CADAM book for information on the
commercial versions of MICRO CADAM, and a listing of their enhancements over
this free demonstration version. Should you want pricing and availability
information on the commercial version, please contact your authorized ALTIUM
VAR (Value Added Remarketer) or call ALTIUM at (704) 595-6900.
The files MENU.EXE and MENU.DAT are now installed in your \MCADAM directory.
By entering the command: MENU, you will be presented with a list of all
installed MICRO CADAM products. You can easily invoke any product by using
the cursor keys to highlight the desired item, then pressing the Enter key
to invoke that product. Editing the file MENU.DAT allows you to customize
the menu for your installation. It should be noted that although you can
list many products in the MENU.DAT file, only products actually existing
on your hard disk will appear for selection. The MENU command must be
re-entered when another product is to be invoked; none of the products
currently chain back to the menu.
The batch files 2CAD.BAT and 2OLD.BAT are provided in your \MCADAM directory
and can be used to easily switch back and forth between MICRO CADAM PLUS and
other products that might require a different CONFIG.SYS and/or AUTOEXEC.BAT.
To use this facility, use the MCINSTAL command to automatically create the
CONFIG.CAD and AUTOEXEC.CAD files, and DO NOT replace your old CONFIG.SYS and
AUTOEXEC.BAT files. Then, use the command 2CAD to automatically switch over
to the MICRO CADAM PLUS configuration. Your machine will be rebooted for you.
Then, you can switch back to your old configuration by using the command 2OLD.
Using these commands makes switching back and forth a painless process.
The following documentation files can be found in the \MCADAM directory.
These files contain information not found in the documentation.
PLOTTER.DOC
CALCOMP.DOC
HPGL.DOC
HPGL2.DOC
SUPERVGA.DOC
To read these files use the DOS TYPE command or any editor.